Personalized masks with your own design. Don't settle for putting a logo on the mask. We will help you design something spectacular.
|250||8,80 €||Up to 889,92 €|
|125||9,50 €||Up to 356,90 €|
|60||10,00 €||Up to 141,57 €|
|30||10,70 €||Up to 49,69 €|
|6||11,53 €||Up to 4,98 €|
Two-layer mask made of water-repellent materials. 100% polypropylene outer layer printed in full color. Inner layer made of 100% polyester waterproof microfiber (aerosol filtration efficiency:> 96%, particle filtration efficiency:> 92%, breathability, differential pressure:
Designed to reduce the fogging of the glasses and provided with a regulator in each rubber for a better fit.
To find out the size it is necessary to obtain the Reference Measurement that is equal to the distance between the bridge of the nose and the chin. The distance will be measured by a straight line.
If have doubt contact us.
The steps to follow before putting on a mask are:
Once fitted, do not touch the mask with your hands. Wash your hands beforehand with water and soap or hydroalcoholic solution in case you have to touch it.
To avoid contamination when removing the mask, the following steps should be taken:
To wash the masks, we recommend washing by hand with soap and rinsing with plenty of water.
For effective disinfection we recommend using any of the virucidal products authorized by the Ministry of Health for environmental use (PT2), which have passed Standard 14476 on virucidal activity and are registered for use by the general public.
Disinfection is also effective by immersing the masks in a 1:50 dilution of bleach (20 ml bleach, 980 ml water) with warm water for 30 minutes. Subsequently, they should be washed with soap and water and rinsed well to remove any remaining bleach and allow to dry. Although effective, continued use of bleach can decrease the hydrophobic properties of the material .
Tweet or like in Facebook and get a voucher of 1€